Improving room-temperature electrochemical performance of solid-state lithium battery by using electrospun La2Zr2O7 fibers-filled composite solid electrolyte

Low ionic conductivity at room temperature and poor interfacial compatibility are the main obstacles to restrain the practical application of polymer solid electrolytes. In this work, lanthanum zirconate (LZO) fibers were prepared by electrospinning method and used for the first time as fillers in sandwich polypropylene carbonate (PPC)-based solid electrolyte. Meanwhile, a graphite coating was applied on one surface of the composite solid electrolyte (CSE) membrane. The results show that the LZO fibers significantly increases the room-temperature electrochemical performance of the CSE, and the graphite coating enhances the interfacial compatibility between electrolyte and lithium anode. Furthermore, an ultra-thin PPC-LZO CSE with a total thickness of 22 μm was prepared and used in NCM622/CSE/Li solid-state cell, which shows an initial discharge capacity of 165.6 mAh/g at the current density of 0.5C and a remaining capacity of 113.0 mAh/g after 250 cycles at room temperature. Rise to 1C, the cell shows an initial discharge capacity of 154.2 mAh/g with a remaining capacity of 95.6 mAh/g after 250 cycles. This ultra-thin CSE is expected to be widely applied in high energy-density solid-state battery with excellent room-temperature electrochemical performances.     

Nonreciprocal properties of 1D magnetized plasma photonic crystals with the Fibonacci sequence

In this paper, the nonreciprocal properties of a novel kind of 1D magnetized plasma photonic crystals(MPPCs) with the Fibonacci sequence are investigated. The isolation of the proposed 1D MPPCs is also used to analyze the nonreciprocal properties. Compared to the conventional 1D MPPCs with periodic structure, the nonreciprocal performance can be significantly improved.The effects of several parameters of the proposed 1D MPPCs on the nonreciprocal properties are studied by the transfer matrix method, which includes the incident angle, order of the Fibonacci sequence, plasma frequency, plasma cyclotron frequency and plasma filling factor. The obtained results show that the nonreciprocal propagation properties can be improved by increasing the values of the plasma cyclotron frequency and incident angle, but they will worsen by blindly increasing the order of the Fibonacci sequence, plasma frequency and filling factor of plasma.The peaks of transmittance also are obviously reduced. In addition, the value of isolation will increase with increasing the incident angle, order of Fibonacci sequence, plasma frequency and plasma filling factor. However, when the plasma cyclotron frequency is increased, the value of isolation will be increased at lower frequencies, but is almost unchanged at higher frequencies.     

基于强化学习的HP模型优化方法研究

蛋白质结构预测问题一直是生物信息学中的重要问题。基于疏水极性模型的蛋白质二维结构预测问题是一个典型的NP难问题。目前疏水极性模型优化的方法有贪心算法、粒子群算法、遗传算法、蚁群算法和蒙特卡罗模拟方法等，但这些方法成功收敛的鲁棒性不高，容易陷入局部最优。由此提出一种基于强化学习的HP模型优化方法，利用其连续马尔可夫最优决策与最大化全局累计回报的特点，在全状态空间中，构建基于能量函数的奖赏函数，引入刚性重叠检测规则，充分挖掘生物序列中的全局进化关系，从而进行有效与稳定的预测。以3条经典论文序列和5条Uniref50序列为实验对象，与贪心算法和粒子群算法分别进行了鲁棒性、收敛性与运行时间的比较。贪心算法只能在62.5%的序列上进行收敛，该文方法能在5万次训练后稳定的在所有序列上达到了收敛。与粒子群算法相比，两者都能找到最低能量结构，但该文的运行时间较粒子群算法降低了63.9%。     

社交网络中基于网络结构支撑模型的谣言传播研究

结合结构支撑理论，探究节点网络结构支持力的一些性质，提出了社交网络结构中的全网支持力和被支持力的总量一致性，并进一步提出计算节点支持力的方法。谣言作为特殊信息，在支持力不同节点之间的传播特性有所不同，借鉴随机游走模型中的PageRank计算方法，对不同节点支持力的谣言传播以及传播后的辟谣状况进行了仿真模拟，结果表明支持力不同的节点对于谣言传播和辟谣影响明显。     

应用于车载激光雷达的宽带AGC跨阻放大器

针对车载激光雷达接收端脉冲信号脉宽窄、动态范围大等特点,提出了一种新型宽带、宽动态范围和高增益的自动增益控制(AGC)跨阻放大器。采用改进型调节型共源共栅结构作为输入级,拓展了带宽。使用改进型吉尔伯特单元作为可变增益放大器,进一步提高了带宽和增益。增加了AGC环路,提高了输入动态范围。基于标准 0.18 μm CMOS工艺进行设计与仿真,整体版图尺寸为760 μm×650 μm。仿真结果表明,该电路的-3 dB带宽为1.06 GHz,跨阻增益为80.79 dBΩ,输入动态范围为60 dB(1 μA~1 mA),功耗为47.6 mW,满足车载激光雷达接收机的要求。     

基于BS值的钢中多相组织分相技术

为了对钢中双相或多相组织进行分相定量表征，利用场发射扫描电镜(FE SEM)与电子背散射衍射技术(EBSD)中的BS值对其进行了详细的研究与讨论。结果表明，对于单相的铁素体、贝氏体或马氏体，其BS灰度分布图呈近似的正态分布，BS图可以呈现出类似于组织的图像。利用BS值可以很好地对结构相近的双相或多相组织进行分相定量。在分相定量时，需选择适合的拟合函数，定量结果才更为准确。     

径向弹簧蓄能密封结构最大接触应力的有限元分析

为研究径向弹簧蓄能密封结构的密封特性，针对典型径向弹簧蓄能密封结构，分析其密封机制以及O形弯曲金属螺旋弹簧的弹性特性；采用ANSYS有限元分析软件，建立典型弹簧蓄能密封结构的非线性有限元分析模型，对弹簧蓄能密封圈在不同压缩率、不同介质压力下的接触应力进行分析，研究在多种工况下最大接触应力的变化情况。结果表明：压缩率保持不变时，最大接触应力随着介质压力的增大而增大；介质压力保持不变时，随着压缩率的增大，最大接触应力先增大再减小。对压缩率、介质压力与最大接触应力的关系进行曲线拟合，可用于指导弹簧蓄能密封结构的精确设计。